Ossum RC Jeep Rat Rod Rolling Train Kit (with 2 speed gear box)

OSSUM MB Jeep ratrod remix: This kit should contain the full rolling train parts to convert or built a 2WD jeep with a front solid axle, it is design to fit a 35-36 900KV brushless outrunner motor working on 3 cell. To make this built I used the raised tray, back frame, tub and windshield designed by Intashu. The 2 speed gear box design is borrowed from 3D Anarchy Jeep built and was fully reworked for this model. It has a functional gear stick lever moving during gears change. The gearbox has a larger bottom housing to accommodate larger gears. The dog teeth are also reinforced. Although I first used this model with a fixed 3D printed differential I have now switched to this metal solid axle which is more reliable. To get the correct track I replaced the large stock wheel hex by some thinner ones and I fitted low offset wheels. Please note that this model requires a couple of holes to be made on the chassi frame to fit these parts, I have not redesigned the frame as I though it was not such an issue. For gear box assembly guidelines take a look at the 3D Anarchy Instructable https://www.instructables.com/id/3D-Printed-Willys-RC-4X4/ Parts: Intashu Hotrod Conversion Kit (pick at least the rear raised frame, tunnel tub & raised tray) https://www.thingiverse.com/thing:2442282 Original Ossum model (pick the remaining parts): https://www.thingiverse.com/thing:2056923 3D Anarchy Model (alternative for the remaining parts with diff, however the front chassi frame won't fit gearbox mount holes, take the Ossum front chassi instead): https://www.thingiverse.com/thing:2596295 Front wheel (design by Ataylor60): https://www.thingiverse.com/thing:2158222 Rear axle (this one is can be locked but that doesn't matter): http://www.rcmart.com/aluminum-alloy-diff-adjustable-rear-axle-axial-scx10-p-71096.html?cPath=1102_1495 ESC 45Amp: http://www.rcmart.com/team-powers-tpxpsel-brushless-speed-control-wled-progr-p-66837.html?cPath=1560_1021 E