28mm tabletop gaming industrial gantry terrain

MINOR UPDATE [2017-05-20] have just uploaded a cleaned-up sketchup file for anyone who want to make their own. had a bunch of duplicate components that was bloating the file up to 2mb. MINOR UPDATE [2017-05-11] v3 items removed. v2 should get you there. ramp01 now has two formats 'print flat' which prints horizontal to the printer bed, or 'print in place' which prints as it would sit on the game table (45o). second option requires substantially more support but reports suggest that it prints much better. both options are available. MINOR UPDATE [2017-05-08] v2 risers and ramps modified to reduce clearance of connector pieces. all 'double riser' connectors reduces as they created a gap between decks. v1_ramp01 flipped over 180o to reduce print cleanup. v3 added for risers and ramps. this creates a uniform 0.1 clearance in all directions where there is a connection (glueable). i'm not entirely convinced about v3. MAJOR UPDATE [2017-05-05]: new/updated models added. based on suggestions/requests from people doing printing (thanks abchiptop). work log... - checked all decks same dimension (5mm thick) [x] - checked filler01 and filler02 match the gaps in decks [x] - check riser top surfaces are same and match gaps in decks [x] - check riser width (vertical) as same (4mm width) [x] - 'bottom level' risers reduced 'foot' by 2mm [x] - double-sided riser top variants [x] - riser05, riser02; increased all underside catches by 2mm [x] - guard1a and guard1b; increased all underside catches by 2mm [x] - ladder; increased underside catches by 2mm [x] - handrail; increased all underside catches by 2mm [x] - lowguard; increased all underside catches by 2mm [x] - check ramp01 and ramp02 match the gaps in the decks [x] - recess top bar of all risers by 2mm in all directions except underside (v2) [x] - recess connection piece for ramp01 and ramp02 (v2) [x] - reduce filler01 and filler 02 (v2) [x]