Anycubic Mega Zero X-Axis Linear Rail

Check out my other design for converting the Z-Axis to use dual lead screws and linear rods: https://www.thingiverse.com/thing:4817790 https://youtu.be/EMDsv_4jz4s https://youtu.be/bGszZp_2sEU This is part of a series of mod designs for the Mega Zero V1, here are others mods I've designed: - [MGN12 Y-Axis](https://www.thingiverse.com/thing:4903945) - [Dual Lead Screw Linear Rods Z-Axis](https://www.thingiverse.com/thing:4817790) - [Sherpa Mini Direct Drive Mount](https://www.thingiverse.com/thing:4843855) (not needed if using replacement gantry plate. See 8/31/2021 update notes below) - [Magnetic Lead Screw Anti-Wobble](https://www.thingiverse.com/thing:4790439) **EDIT** 9/15/2021 - Updated gantry plate screw holes and nut fixtures. Tighter fit for M3 nuts so that they don't easily fall out when adjusting or disassembly. The belt clip gaps have been reduced so that the belt will be centered to the aluminum extrusion when belt is fully seated. 8/31/2021 - Updated Rail mount (left, right, and center). Print in default orientation with 3 walls, 30% infill. These have tighter tolerance and will sit firmly against the 2020 extrusion. Make sure to calibrate your flow rate prior to printing. Dimensional accuracy is very important. PETG is the preferred material. - Added replacement stock gantry plates with Ender 3 mounting points and Manta Compact fan shroud gantry plate that's compatible with the first and second versions. - Print using 4 walls, 30-40% gyroid infill. PETG is a must. - Hotend adapter will also require 2 M3 nuts and 2 M3x22mm - [Manta Compact Fan Shroud](https://www.thingiverse.com/thing:4337266) - Sherpa Mini Mounting brackets for the first version: https://www.thingiverse.com/thing:4937471 - [Manta Compact Fan Shroud MK2](https://www.thingiverse.com/thing:4943125) - When using the Manta Compact fan shroud, you'll need a new end-stop limit switch with a 50mm arm: AMZ Product ID: B07ZVJD1GC 5/5/2021