Super Sonico BiCute Bunny Lithophane Base

# Super Sonico Lithophane Base Summary: The files contained in this project are to create a base for the Super Sonico BiCute Bunnies figure. https://myfigurecollection.net/item/943304 To create the base, there are a few different components, the lithophane, the base, the LED backlight, and the acrylic window. All project files are present here so you can make any modifications. Feel free to send any questions my way. Additional Download Link (couldn't upload some images): https://drive.google.com/drive/folders/1OsMXtlPJXgMlv-QceGGKDy0g5LuUmhJj?usp=sharing # Before you Get Started ## Materials Used - PLA Filament - 3D Printing Resin - Backlight: https://www.ebay.com/itm/114321249922 - CR2032 3V Coin Cell Battery - Battery Holder: https://a.co/d/gk2BmZj - Acrylic Sheet - Need enough to make a total thickness of 1/4" ## Equipment Used - FDM 3D Printer - Resin 3D Printer - Laser Cutter - Soldering Iron ## Website -Lithophane maker: https://3dp.rocks/lithophane/ # Base The base was designed using Autodesk Inventor and the design files have been included. The parts are as follows: - Backlight: Holder for the LED backlight. - Bottom Base: bottom of the stand, connect the backlight to it. - Middle Base: Connects the bottom base and provides spacing for the lithophane and window. - Top Cover: Place on top of the middle base. The design can be modified to accommodate different components. The holes are for M3 screws. # Lithophane The lithophane displays an image when light is placed underneath it. In this project, the lithophane's thickness could have been reduced for light to pass through better. See the blender file. The lithophane contains the following - A copy of the image used. - Lithophane: STL for image -> Lithophane - Lithophane template: sets the size of the insert - Dimensions: 4.33in Diameter x 5mm - Lithophane insert: complete lithophane # Window The window was laser cut in acrylic, but i