Anycubic Mega S Tool box attachment

I used mjuddi bracket mount version and deleted the tool rig, added the toolbox, There are two files, one for right mount and one for left mount. I printed this piece with supports, but I apparently used the wrong support and ended up breaking my bracket when I was trying to remove the support after it was printed. The support doesn't need to be sturdy. Specs: 20% infil, with brim. Let me know how yours printed out, so I can update this toolbox rig. *Update 9/07/23: * It has been a while since I made an update on this design. I decided to have everything put to one side and use the other for a spool holder. There are two options available. One is separate parts with one hanging down. The other is a one piece. The tool piece is a remix from mjuddi. *Update 9/18/19: * Revised the spatula hanger, should be stronger now, Rev I for left or right-side mount. *Update 6/7/19: * increased the dimensions for the spatula to make it a little thicker and stronger. Update 5/5/19: Reworked the design, toolbox now has dividers, the bracket has been re-centered. Update 5/3/19. Repaired the design, all is good now. Update 4/24/19 There's an issue in printing the toolbox with the caliper, apparently it isn't attached to the box, I am working to fix that issue Update 4/23/19 Added a modified tool box, left and right mount files. These ones have the divider inserts Update: 4/21/19 Revised the toolbox with attachments, brought the box closer to the frame, moved the caliper holder down. Added a left side mount as well Update: 4/13/19 Added another file which has tool box with caliper and spatula holders for right side mount